5 Steps for Getting a Car Loan

This Article was Updated July 5, 2018

When you are looking to buy a vehicle, the first thing you should do is apply for a preapproved loan. The loan process can seem daunting, but it’s easier than you think and getting preapproval prior to going to the car dealer may help alleviate a lot of frustration along the way.

Here are five steps for getting a car loan.

  1. Check Your Credit
  2. Know Your Budget
  3. Determine How Much You Can Afford
  4. Get Preapproved
  5. Go Shopping

1. Check Your Credit

Before you shop for a loan, check your credit report. The better your credit, the cheaper it is to borrow money and secure auto financing. With a higher credit score and a better credit history, you may be entitled to lower loan interest rates, and you may also qualify for lower auto insurance premiums.

Review your credit report to look for unusual activity. Dispute errors such as incorrect balances or late payments on your credit report. If you have a lower credit score and would like to give it a bit of a boost before car shopping, pay off credit card balances or smaller loans.

If your credit score is low, don’t fret. A lower score won’t prevent you from getting a loan. But depending on your score, you may end up paying a higher interest rate. If you have a low credit score and want to shoot for lower interest rates, take some time to improve your credit score before you apply for loans or attempt to secure any other auto financing.

2. Know Your Budget

Having a budget and knowing how much of a car payment you can afford is essential. You want to be sure your car payment fits in line with your other financial goals. Yes, you may be able to cover $400 a month, but that amount may take away from your monthly savings goal.

If you don’t already have a budget, start with your monthly income after taxes and subtract your usual monthly expenses and how much you plan to put in savings each month. For bills that don’t come every month, such as Amazon Prime or Xbox Live, take the yearly charge and divide it by 12. Then add the result to your monthly budget. If you’re worried, you spend too much each month, find simple ways to whittle your budget down.

You’ll also want to plan ahead for new car costs, such as vehicle registration and auto insurance, and regular car maintenance, such as oil changes and basic repairs. By knowing your budget and what to expect, you can easily see how much room you have for a car payment.

3. Determine How Much You Can Afford

Once you understand where you are financially, you can decide on a reasonable monthly car payment. For many, a good rule of thumb is to not spend more than 10% of your take-home income on a vehicle. In other words, if you make $60,000 after taxes a year, you shouldn’t spend more than $500 per month on car payments. But depending on your budget, you may be better off with a lower payment.

With a payment in mind, you can use an auto loan calculator to figure out the largest loan you can afford. Simply enter in the monthly payment you’d like, the interest rate, and the loan period. And remember that making a larger down payment can reduce your monthly payment. You can also use an auto loan calculator to break down a total loan amount into monthly payments.

You’ll also want to think about how long you’d like to pay off your loan. Car loan terms are normally three, four, five, or six years long. With a longer loan period, you’ll have lower monthly payments. But beware—a lengthy car loan term can have a negative effect on your finances. First, you’ll spend more on the total price of the vehicle by paying more interest. Second, you may be upside down on the loan for a larger chunk of time, meaning you owe more than the car is actually worth.

4. Get Preapproved

Before you ever set foot on a car lot, you’ll want to be preapproved for a car loan. Research potential loans and then compare the terms, lengths of time, and interest rates to find the best deal. A great place to shop for a car loan is at your local bank or credit union. But don’t stop there—look online too. The loan with the best terms, interest rate, and loan amount will be the one you want to get preapproved for. Just know that preapproved loans only last for a certain amount of time, so it’s best to get preapproved when you’re nearly ready to shop for a car.

However, when you apply, the lender will run a credit check—which will lower your credit score slightly—so you’ll want to keep all your loan applications within a 14-day period. That way, the many credit checks will only show as one inquiry instead of multiple ones.

When you’re preapproved, the lender decides if you’re eligible and how much you’re eligible for. They’ll also tell you what interest rate you qualify for, so you’ll know what you have to work with before you even walk into a dealership. But keep in mind that preapproved loans aren’t the same as final auto loans. Depending on the car you buy, your final loan could be less than what you were preapproved for.

In most cases, if you secure a pre-approved loan, you shouldn’t have any problems getting a final loan. But being preapproved doesn’t mean you’ll automatically receive a loan when the time comes. Factors such as the info you provided or whether or not the lender agrees on the value of the car can affect the final loan approval. It’s never a deal until it’s a done deal.

If you can’t get preapproved, don’t abandon all hope. You could also try making a larger down payment to reduce the amount you are borrowing, or you could ask someone to cosign on the loan. If you ask someone to cosign, take it seriously. By doing so, you are asking them to put their credit on the line for you and repay the loan if you can’t.

When co-signing a car loan, they do not acquire any rights to the vehicle. They are simply stating that they have agreed to become obligated to repay the total amount of the loan if you were to default or found that you were unable to pay.

Co-signing a car loan is more like an additional form of insurance (or reassurance) for the lender that the debt will be paid no matter what.

Usually, a person with bad credit or less-than-perfect credit may require the assistance of a co-signer for their auto financing and loan.

5. Go Shopping

Now you’re ready to look for a new ride. Put in a little time for research and find cars that are known to be reliable and fit into your budget. You’ll also want to consider size, color, gas mileage, and extra features. Use resources like Consumer Reports to read reviews and get an idea of which cars may be best for you.

Once you have narrowed down the car you are interested in, investigate how much it’s worth, so you aren’t accidentally duped. Sites such as Kelley Blue Book or Edmunds can help you figure out the going rate for your ideal car. After you’re armed with this information, compare prices at different car dealerships in your area. And don’t forget to check dealer incentives and rebates to get the best possible price.

By following these steps, you’ll be ready to make the best financial decision when getting a car loan. Even if you aren’t ready to buy a car right now, it doesn’t hurt to be prepared. Start by acquiring a free copy of your credit summary.

It is always a good idea to pull your credit reports each year, so you can make sure they are as accurate as they should be. If you find any mistakes, be sure to dispute them with the proper credit bureau. Remember, each credit report may differ, so it is best to acquire all three.
If you want to know what your credit is before purchasing a car, you can check your three credit reports for free once a year. To track your credit more regularly, Credit.com’s free Credit Report Card is an easy-to-understand breakdown of your credit report information that uses letter grades—plus you get a free credit score updated every 14 days.

You can also carry on the conversation on our social media platforms. Like and follow us on Facebook and leave us a tweet on Twitter.

Image: istock

The post 5 Steps for Getting a Car Loan appeared first on Credit.com.

Source: credit.com

10 Under Sink Storage Solutions You Need in Your Life

Keeping your house organized is no easy task and the space under the sink is no exception. It’s often easy to forget about the storage under the sink as it’s mostly covered and hidden.

However, it can and should be just as organized as any other part of your house. Here are 10 under the bathroom sink and under kitchen sink storage ideas.

Under kitchen sink storage ideas

The kitchen is one of the most used rooms in any house or apartment. The only thing that makes a kitchen more enjoyable is when it’s clear of clutter, under the sink included.

Here are some clever under the kitchen sink storage ideas for you to try.

kitchen sink storage

1. Hang bottles with tension rods

Tension rods are one of the best under sink storage solutions. They can be used on virtually every surface and also can be fitted to almost any size area. Once they’re in place you can hang cleaning supply bottles from them to free up space from the bottom of the cabinet.

One of the best things about tension rods is they’re not permanent and they can easily be removed and reused through the house.

2. Use file holders to add storage

File holders aren’t just nifty organizers for the paper on your desk — they make great storage for under your kitchen sink. They’re pretty inexpensive and easy to find at your local paper store or Target.

All you have to do is adhere them to the inside of the cabinet door and you’ll have yourself some extra storage. It’s a great place to put extra towels, dish brushes or sponges for easy access.

3. Organize with bins

When organizing, you can never go wrong with a good old bin. They make a great space to neatly organize and group everything into their own neat place. Once everything has its place you can easily stack them to create even more cleared up space.

Another tip is to label them so that you don’t have to waste time sifting through each one when you’re looking for one thing.

4. Expand storage with a Lazy Susan

Let’s all thank Susan for being lazy and inventing the lazy Susan. It’s one of the most helpful and fun storage hacks on the list. They come in a variety of sizes to fit under any cabinet and make finding what you’re looking for super easy. The best part is you just place all your supplies on it and you’re done!

5. Install cabinet towel holders

Similar to tension rods, cabinet towel holders offer extra space in your cabinet while keeping it organized. They’re very easy to find and even easier to set up and can be used in a variety of spaces around the home, including under your kitchen sink.

All you have to do is remove the packaging and attach the hooks to the door part of your cabinet. Once you’ve done that hang anything from them like cleaning supplies, extra towels and even your cleaning gloves.

Under bathroom sink storage

Similar to the kitchen sink, the bathroom sink is another space that can be difficult to organize. Fear not we’ve got you covered there, too! Here are some great tips for how to organize under your bathroom sink.

bathroom sink storage

6. Store hair tools with PVC piping

When you think of PVC piping under the bathroom sink, storage probably doesn’t come to mind. PVC pipes are a great way to store hair tools such as curling irons, flat irons and their cords. Since they come in a multitude of sizing, you can perfectly fit your tools to the pipe. When you have a perfect size the only thing left to do is attach it to the inside of the cabinet doors.

7. Declutter with sliding shelves

Sliding shelves are a great way to de-clutter under your bathroom sink. They create more space to store items, such as hair products and tools, toilet paper, etc. One of the best things about sliding shelves is the easy access to everything without having to dig through all your things.

8. Create extra space with cabinet door bins

Creating extra storage in small areas is a great way to accomplish all your organizing goals. One way to add extra space is to add cabinet door bins. They’re extremely easy to adhere and also can be removed easily when you’re done using them. They also hold quite a bit and are a great place to put your products, brushes, towels and more.

9. Utilize bins and caddies

As mentioned above, a bin or a caddy is one of the most useful tools to create a clutterless space. Get a large bin specifically for towels and toilet paper and they usually take up the bulk of under sink storage. Use smaller bins for other supplies and stack them to create ample, organized space.

10. Hang caddies over the cabinet door

Hair tools can take up a lot of space under your bathroom sink. One of the best ways to combat bulky hair tools is an over-the-door caddy. They make some specifically for hair tools that easily slip over the door for easy access and assembly.

Do’s and don’ts of under sink storage

You can store a number of items under your bathroom and kitchen sink. Although, there are some items more suitable for under sink storage than others.

under sink storage

Things to safely store under your kitchen sink

  • Sponges, cleaning brushes, gloves
  • Cleaning supplies, such as glass cleaner, dishwashing pods, soap. When storing cleaners underneath the kitchen sink, keep in mind who is in your household. If you have small children that enjoy exploring cabinets you may consider placing cleaners out of reach or adding childproof locks on the door. Another idea is to place all your cleaning supplies on a rubber tray in case of spills for easy cleanup.
  • Trash bags
  • Trash can
  • Recycling can

Things to safely store under your bathroom sink

  • Toiletries, such as extra toothbrushes and paste, deodorant, contact solution
  • Toilet paper
  • Towels
  • Hairstyling tools
  • First aid kit

Things to avoid putting under the kitchen sink

  • Bug spray
  • Oven cleaner
  • Lightbulbs
  • Food

Things to avoid putting under the bathroom sink

  • Jewelry
  • Medications

Organize under your sink

Organizing is never an easy task, however, with the right guidance, it can be a little easier. Use these under the bathroom and kitchen sink storage ideas to create a nice organized space for yourself.

The post 10 Under Sink Storage Solutions You Need in Your Life appeared first on Apartment Living Tips – Apartment Tips from ApartmentGuide.com.

Source: apartmentguide.com

Should I Buy or Lease My Next Car?

Gas can make summer road trips expensive, but the right credit card can earn some of that spending back.

One of the most common questions I am asked as a financial planner is “should I lease or buy my car?” Leasing commercials on the radio make it sound like leasing a car is the only cheap, intelligent choice. However, it really depends on how you define “cheap.” If it means a lower monthly payment, then leasing is usually cheaper. If it means what you pay long term, though, leasing is usually not the best option.

What’s the Process of Buying a Car?

Buying a car is a relatively straightforward process. Essentially, you negotiate the price of the car at the dealership and you secure financing. After providing a down payment, you’d finance the entire remaining value of the car, usually through a loan from a bank or credit union. You would then make payments that include both principal and interest for a specified period of time. Once your contract is complete, and the loan or other financing is paid off, you’d own the car outright.

At that point, you could decide to keep it or sell it. If you sold it, you’d have to negotiate the sale to get the price you want. One disadvantage of owning the car is that thanks to regular wear and tear and other factors, you have no guarantee of what the car will be worth at the end of the financing period.

How is Leasing Different from Buying?

Leasing is a bit more complicated, but it’s basically just another method of financing a car. The difference is you aren’t financing the entire car—just the use of the car during the first few years of the car’s life. The payments you make would still consist of principal and interest, but only for the portion of the car’s life you’d be using up.

The biggest difference is that unlike buying a car, you don’t own anything once a lease is complete—and if you still needed a vehicle, you’d have to acquire another one. Typically, you can purchase the car for a pre-set price (known as the residual value) once the lease term is over, or you can give the car back to the leasing company and decide to either purchase or lease another vehicle.

Do You Have to Pay Extra Fees to Lease a Car?

Many advertised leases also require a down payment. If you’re short on cash, you can skip the down payment, but your monthly payment would be higher because you’d be financing more of the car. Also, keep in mind that you’re still responsible for the condition and mileage of the cars you lease. When you turn the car back in, if it isn’t in good condition or if you’ve driven more miles than your lease allows (around 12,000 miles per year), then you’ll have to pay extra.

When Is It Better to Lease Rather Than Buy?

Before you decide to lease or buy, you’ll also need to determine how many miles you drive per year and how long you like to keep your cars. If you are a high mileage driver (say, more than 15,000 miles per year) or you like to keep your cars for three years or more, you are most likely better off purchasing the car. If you don’t drive much and you prefer driving new cars, then leasing may be a better option for you.

Regardless of whether you lease or buy, you’ll need good credit to qualify for a low interest rate. So before you shop for a car, see where you stand: check your credit score for free at Credit.com.

Image: monkeybusinessimages 

The post Should I Buy or Lease My Next Car? appeared first on Credit.com.

Source: credit.com

How to Clean Grout: 5 Steps to Sparkling Tile

Grout is a construction material that is used to fill the space between tiles, and with normal wear and tear it tends to get pretty dirty. Since it’s typically a lighter color and has a porous competition, grout is particularly prone to showing dirt, mold and stains. The good news is that it’s not difficult to clean grout, and in several steps, you can have sparkling tiles once again. Below you’ll find step by step instructions for how to clean grout and learn how to keep it clean long-term.

How to clean grout

Cleaning grout just requires a good grout cleaner, a scrub brush and a little elbow grease. So throw on a pair of rubber gloves — especially if you’re handling chemicals — and let’s get started.

Step 1: Remove surface dirt

scrubbing grout with brush

Scrub the grout using warm water and stiff-bristled brush to remove as much surface dirt as possible. If you don’t want to invest in a special grout brush, you can always use a scrub brush or even an old toothbrush.

Step 2: Mix a cleaning solution

spoon full of baking soda

Purchase a commercial grout cleaner or make a homemade cleaner.

One proven DIY cleaner is made from two parts baking soda and one part hydrogen peroxide. Try adding a teaspoon of dish soap to this mixture to help cut through extra greasy grime.

You’ll want to avoid acidic cleaners as they can dissolve or pit the grout as well as oil-based cleaners, which can leave a film that will attract dirt.

Step 3: Apply the cleaner and let it sit

brushing cleaner on floor with broom

Pour the commercial or your DIY solution over the grout, and depending on what cleaner you use, let it sit for about 10 minutes.

Step 4: Scrub the tile

gloved hand scrubbing grout

Use your brush to scrub the tile again. Since the grout is porous, make sure to scrub hard so that you reach the tiny spaces dirt and grime may have seeped into.

Step 5: Rinse away the cleaning solution

woman mopping floor

Wash away the cleaner with a mop or wipe clean with a damp cloth.

Best DIY grout cleaners

There are a handful of DIY grout cleaners that you can make from just a few ingredients you likely have on hand. If you don’t feel like venturing out to the store, try making these grout cleaners at home.

  • Baking Soda and Water:
    • Mix equal parts to create a paste
    • Scrub directly on grout
  • Baking Soda and Hydrogen Peroxide:
    • Mix two parts baking soda and one part hydrogen peroxide
    • Let it sit on grout for 5-10 minutes, then scrub and rinse
  • Baking Soda, Hydrogen Peroxide and Dish Soap:
    • Mix 1/2 cup baking soda, 1/4 cup hydrogen peroxide and a teaspoon of dish soap
    • Let it sit on grout for 5-10 minutes, then scrub and rinse
  • Heavy Duty Cleaner:
    • Mix 1/2 cup baking soda, 1/3 cup ammonia, 1/4 cup white vinegar and 7 cups warm water
    • Apply to grout and let sit for 5 minutes, then rinse

Additional grout cleaning tips

Everyone has their own method for cleaning, but these additional tips will help ensure that your tile stays in optimal condition.

  • Clean grout regularly — weekly or biweekly — to prevent the buildup of mildew, dirt and mold
  • For frequent cleaning, you can create a natural solution using two parts baking soda and one part water instead of hydrogen peroxide
  • You might also consider applying a grout sealer. It’s easy to apply and is water-resistant, so it will repel moisture and prevent mold and water damage.

Although cleaning can be tedious, sticking to a regular cleaning schedule will help keep your apartment beautiful and functional. Visit our blog for more cleaning and maintenance tips.

{ “@context”: “https://schema.org/”, “@type”: “HowTo”, “name”: “How to Clean Grout”, “Url”: “https://www.apartmentguide.com/blog/how-to-clean-grout”, “description”: “Discover how to clean grout and keep your tiles free of grime and dirt.”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-hero-1140×500.jpg”, “totalTime”: “PT30M”, “supply”: [ { “@type”: “HowToSupply”, “name”: “Rubber Gloves” }, { “@type”: “HowToSupply”, “name”: “Commercial Grout Cleaner” }, { “@type”: “HowToSupply”, “name”: “Clean cloth” }, { “@type”: “HowToSupply”, “name”: “Baking Soda” }, { “@type”: “HowToSupply”, “name”: “Hydrogen Peroxide” }
], “tool”: [ { “@type”: “HowToTool”, “name”: “Scrub Brush” } ], “step”: [{ “@type”: “HowToStep”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-step1.webp”, “name”: “Remove surface dirt”, “url”: “https://www.apartmentguide.com/blog/how-to-clean-grout#step1”, “position”: “1”, “itemListElement” : [
{ “@type”: “HowToDirection”, “position”: “1”, “text”: “Scrub the grout using warm water and stiff-bristled brush to remove as much surface dirt as possible. If you don’t want to invest in a special grout brush, you can always use a scrub brush or even an old toothbrush.” } ]
}, { “@type”: “HowToStep”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-step2.webp”, “name”: “Mix a cleaning solution”, “url”: “https://www.apartmentguide.com/blog/how-to-clean-grout#step2”, “position”: “2”, “itemListElement” : [
{ “@type”: “HowToDirection”, “position”: “1”, “text”:”Purchase a commercial grout cleaner or make a homemade cleaner. One proven DIY cleaner is made from two parts baking soda and one part hydrogen peroxide. Try adding teaspoon of dish soap to this mixture to help cut through extra greasy grime.” },
{ “@type”: “HowToTip”, “position”: “2”, “Text”: “You’ll want to avoid acidic cleaners as they can dissolve or pit the grout as well as oil-based cleaners, which can leave a film that will attract dirt.” } ]
},
{ “@type”: “HowToStep”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-step3.webp”, “name”: “Apply the cleaner and let it sit”, “url”: “https://www.apartmentguide.com/blog/how-to-clean-grout#step3”, “position”: “3”, “itemListElement” : [
{ “@type”: “HowToDirection”, “position”: “1”, “text”:”Pour the commercial or your DIY solution over the grout, and depending on what cleaner you use, let it sit for about 10 minutes.” } ]
},
{ “@type”: “HowToStep”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-step4.webp”, “name”: “Scrub the tile”, “url”: “https://www.apartmentguide.com/blog/how-to-clean-grout#step4”, “position”: “4”, “itemListElement” : [
{ “@type”: “HowToDirection”, “position”: “1”, “text”:”Use your brush to scrub the tile again. Since the grout is porous, make sure to scrub hard so that you reach the tiny spaces dirt and grime may have seeped into.” } ]
},
{ “@type”: “HowToStep”, “image”: “https://www.apartmentguide.com/blog/wp-content/uploads/2020/08/how-to-clean-grout-step5.webp”, “name”: “Rinse away the cleaning solution”, “url”: “https://www.apartmentguide.com/blog/how-to-clean-grout#step5”, “position”: “5”, “itemListElement” : [
{ “@type”: “HowToDirection”, “position”: “1”, “text”:”Wash away the cleaner with a mop or wipe clean with a damp cloth.” } ]
}] }]}

The post How to Clean Grout: 5 Steps to Sparkling Tile appeared first on Apartment Living Tips – Apartment Tips from ApartmentGuide.com.

Source: apartmentguide.com

4 Questions to Ask Yourself Before Leasing or Buying a Car

When you’re looking for a new car, it can be difficult to decide whether buying one outright or leasing one for a period of time makes more sense. It’s true that cars only go down in value the longer you own them, but there are still some solid arguments for owning one outright rather than essentially renting one.

Car-related decisions can be stressful, and there’s a lot you need to know before buying or renting, but don’t worry. If you’re in the market for a new car and aren’t sure which way to go, you can use the following questions to help you make the best decision for your situation.

Question 1: How Much Will I Be Driving This Car?

If you only need a car for weekend adventures and plan to use public transportation or to carpool during the week, then leasing might be the better option for you, if you can get a good deal. Most lease contracts come with stipulations on how many miles you can put on the car while you’re using it, but if you’re only using it for a few quick trips each week, you likely won’t come close to hitting that mileage mark. Still, you’ll want to pay close attention to that number if you do end up going for a lease. Always ask what happens if you go over the mileage count, since the penalties can be steep. On the other hand, if you have a lengthy commute to get to work and you need a reliable car to get you there—or you just aren’t interested in tracking miles—buying might be better for you.

Question 2: What Do I Plan to Use It For? 

You probably wouldn’t go into a car purchase intending to rough up the car, but stuff happens, so you’ll need to decide what you plan to use your car for to know if leasing is right for you. If you lease a car, the dealer generally allows normal wear and tear upon return at the end of your lease, but you’ll be charged extra if they think the car has been more weathered. Be sure to get the specifics from the dealership on what exactly they consider “normal” wear and tear, and if that doesn’t match your plans for the car—if you plan to off-road in the Colorado Rockies on most weekends, for example—it might be better to buy.

Question 3: How Long Do I Plan to Keep It?

One appealing thing about leasing a car is that most car leases end after three years—so you have the opportunity to upgrade to a new model every three years if you’d like. Of course you could buy a car and upgrade that way, but it can be harder to deal with the sale of a car than it is to just turn your lease back over to the dealer.

Question 4: How Much Can I Afford to Put Down?

Most lease agreements will come with lower down payments than buyer agreements have. In some cases, if you lease a car, you may even be able to negotiate with the dealer to skip a down payment altogether. (Keep in mind, though, that this will likely result in higher monthly payments.) Either way, if you really need a car now, and you don’t have the cash for a decent down payment, then going with a lease may put you in the driver’s seat faster than if you waited to buy a car.

Buying a car is a very personal decision, and whether you lease or buy will be determined by a number of factors. At the end of the day, buying a car is almost always the cheaper option if you need a car for the long term, but signing up for a short-term lease can be a solid option depending on your needs. Putting in a little bit of extra thought before searching for your next ride can ensure you make the right decision.

Whatever move you decide to make, be smart in how you approach car buying or leasing. Don’t forget that having good credit will improve your car-buying experience, so before you make car-related decisions, check your credit and see where you’re at. You can always check your credit for free at Credit.com.

Image: istock

The post 4 Questions to Ask Yourself Before Leasing or Buying a Car appeared first on Credit.com.

Source: credit.com

How To Clean An Iron To Make It Look Brand New

Cleaning an iron is a household task that’s easy to forget about. However, with all the shirts to press, sheets to smooth and pants to unwrinkle, it’s no wonder our irons get worn out. Giving your iron the TLC it needs can be simple and way cheaper than opting for a newer model.

There are many different ways to clean and shine your iron using some elbow grease and a few items you may already have in your home. Keeping your iron clean is necessary to keep the chore easy and productive, so check out these tips to clean an iron without any fancy cleaning products required.

1. Clean with baking soda

Baking soda is used to clean almost anything, whether it’s your household appliances, fruits and veggies or your iron. You can create a stain-fighting paste using two tablespoons of baking soda mixed with one tablespoon of warm water. Gently rub the paste on a cool iron plate, coating areas that have mineral deposits. Wipe the paste off using a damp cloth.

Pro tip: Avoid getting the paste in the iron’s steam holes. If you manage to get it in there, use a damp cotton dipped in distilled water or a wooden toothpick to clean it out.

2. Clean with sea salt

person filling up water tank in an iron

Believe it or not, using salt to clean your iron can get the job done. Turn your iron on the hottest setting and lay out a brown paper bag or newspaper on your ironing board. Sprinkle a generous amount of salt over the paper bag or newspaper and begin to iron the salty surface. Continue this process until the salt takes away all the dirt on your iron. After this, wipe the salt residue away with a damp cloth.

Pro tip: Iron in circular motions to maximize the amount of dirt you take off.

3. Clean with a towel and vinegar

If your main issue with your iron is corrosion, the towel and vinegar trick will make it look good as new! Soak a towel in vinegar and then set the iron onto the towel with the soleplate facing down. Let the iron sit in the vinegar-soaked towel for 30 minutes before wiping it down.

Pro tip: Place your soaked towel in a bin or other container to avoid vinegar seeping into unwanted areas.

4. Clean an iron’s steam holes

person steaming their iron

A common problem with dirty irons is the steam holes getting clogged. A good indication of some much needed cleaning is when the iron sputters and leaves mineral-filled or rusty water spots on clothing. Mix ½ cup of vinegar and ½ cup of distilled water into the iron’s reservoir and inspect the steam ducts in an upright position.

Use an old toothbrush, wooden toothpick or cotton swab to clear away build-up. Test the iron by heating it up and depressing the steam button until the steam flows out freely. Let the iron cool before pouring out the mixture into the reservoir.

Pro tip: Never use metal to clean the soleplate of your iron as this could scratch or damage it.

5. Clean with nail polish remover

Not only does nail polish remover clear away nail polish, but also the gunk on your iron plate! Heat up your iron and dip a cotton ball into some acetone nail polish remover. Use a heat-protecting glove like an oven mitt and wipe the cotton ball along the surface of the hot iron. This method helps dissolve any unwanted residue on your iron. Let your iron cool and wipe away excess nail polish remover.

Pro tip: Perform this cleaning method outside so that your household doesn’t breathe in the strong chemical fumes.

6. Clean with paracetamol

An unusual yet excellent hack for cleaning your iron (especially with burnt residue) is paracetamol (like Tylenol). In fact, any acetaminophen tablet will do. First, turn your iron on the highest setting. Once the plate is hot, use an oven mitt or other heat-protecting glove to press the pill directly onto the burnt area of your iron. The pill should melt into a gel which then dissolves the burnt spot on your iron. Use a damp cloth to clean the soleplate and repeat if necessary.

Pro tip: Don’t use tweezers or pliers to press the pill onto your hot iron. One slip could result in scratching your iron or burning your fingers!

7. Clean an iron with wax paper

someone holding an iron upright

Similar to the salt trick above, you can use wax paper with coarse salt to clean your iron. Place wax paper on your ironing board or a cutting board and sprinkle about a tablespoon of sea salt over the wax paper. Heat the iron to its highest temperature and iron the salt without applying much pressure. The residue will stick to the salt and your iron will be good as new!

Pro tip: Make sure the steam function is off while you perform this cleaning trick.

8. Clean with toothpaste

Toothpaste not only clears the plaque on your teeth but the muck on your iron as well. All you need to do is smear a small amount of white toothpaste on any affected areas on your iron’s soleplate. Leave the toothpaste there for a few minutes before wiping it away with a clean cloth.

Pro tip: Finish things off by filling your iron’s reservoir with distilled water and setting it down on a towel. Steam your iron leaving in for an additional few minutes to work through.

9. Clean with dryer sheets

Iron assisting with laundry

Dryer sheets have more uses than freshening up your drying clothes. One way to use a dryer sheet you may not have heard of yet is to clean your iron. Simply rub the soleplate with dryer sheets while the iron is on its lowest heat setting. As soon as you feel the dryer sheet get too hot, grab a fresh one. Repeat this process until the iron is clean.

Pro tip: It’s always a good idea to wear a heat-protecting glove or mitt when touching an iron soleplate. You should be fine while in the lowest setting, but be cautious.

10. Clean an iron with ice cubes

If you accidentally left your hot iron near something plastic, you probably have a bit of a mess to deal with. However, melted plastic is easy to get off an iron by using simple items like a big bowl, ice cubes and a plastic knife or spatula. Place your iron in a bowl or pan full of ice to harden the plastic. If your plastic is already hardened, you can skip this step. Now take a plastic knife or spatula and scrape the plastic away, then wipe it down with a damp rag until you feel the iron’s surface to be smooth.

Pro tip: It’s crucial to get plastic off your iron before you use it again, otherwise the plastic will melt into your garments.

How often should I clean my iron?

The answer to this question heavily depends on how often you use your iron. On average, you should make it a habit to clean your iron every other month to remove mineral deposits. If your iron begins to dull or you see any build-up on the soleplate, then you can do a quick cleanse to avoid having to do a deeper clean.

What is the black stuff on my iron?

someone wiping down their iron

Most people notice their iron is dirty when they see “black stuff” on the soleplate. The “black stuff” you see is a result of burn marks, dirt, dust, spray starch and fabric fiber buildup. Additionally, if you leave water inside your iron, it could begin to rust cause rusty spots. It’s important to maintain your iron to avoid it from damaging or ruining your clothing.

Maintaining a clean iron

To maintain a clean iron, there are a few things to consider. First, try using distilled water rather than ordinary tap water in your iron. Tap water contains minerals which over time results in rust and mineral build-up. Another consideration to avoid rust and mineral build-up is to make sure you empty the reservoir and place it in an upright position before storing it in your laundry room.

To keep your iron’s soleplate sleek and shiny, never iron over metal zippers, buttons, snaps or any other decorative item. The plate will last much longer and keep your iron maintenance low. Maintaining an iron may seem low on the to-do list, but it’s a great laundry hack that will save you a lot of time in the long-run.

The post How To Clean An Iron To Make It Look Brand New appeared first on Apartment Living Tips – Apartment Tips from ApartmentGuide.com.

Source: apartmentguide.com