Candela Technologies

Candela Technologies LANforge Fire and ICE, are ideal for field or lab, and use a common GUI to provide both network traffic generation and WAN emulation.

Get Help

Need Help Call:
(866) 204-6289 or
(310) 410-9350

 

Click Here to request answers to technical questions.

Request

 

Web Demo of LANforge

 

Evaluation Hardware or Software

LANforge RF Attenuator

 

The LANforge RF Attenuator is used to attenuate (decrease) the RF signal between wireless devices.

 

The LANforge attenuator sits between two RF systems (often WiFi AP on one side and a WiFi Station on the other). The attenuator is connect by shielded RP-SMA plug cables between the attenuator and the device to be attenuated. To adjust the attenuations there are knobs on the Attenuator, or adjustment can be made by a software program on a PC connected to the Attenuator by a USB-Serial connection. The included LANforge software suite supports automated scripting as well as manual configuration of the attenuator modules.

 

LANforge RF Attenuator

 

Impedance: 50 Ω

Frequency Range: 0.7 GHz 6.0 GHz

Attenuation Range: 0 95.5 dB

Attenuation Steps: 0.5 dB increments

Insertion Loss: 8 dB nominal, 10 dB max

Attenuation Accuracy: 1-15 dB: 1dB, 16+ dB: 1.5dB or 4%

 

 

The LANforge RF Attenuator has 3 or 4 Channel Models (SMA connectors) and will fit into a small travel bag or briefcase for easy portability. Also, included 6 or 8 RP-SMA Plug to RP-SMA Plug patch cables, USB Cable, and external power supply (brick).

 

Hardware Secifications

 

  • RF Attenuator with 0.7Ghz to 6 Ghz.
  • Includes 3 or 4 ATS0760-95 RF Attenuation modules from EUBUS.
  • Controlled by Arduino-Mega micro-controller and custom electronics boards.
  • USB-Serial console (115200 8 N 1) for scripting and automated control.
  • 2 rotating knobs for manual adjustment.
  • LCD Screen for display of current settings.
  • High-Quality aluminum chassis with extruded body and 2.4mm thick faceplates.
  • Internal RF connectors are highly shielded semi-rigid SMA cables.
  • +9v 1AMP external power supply (brick). May also be powered from 500ma USB port.
  • Weight: 3 lbs or 1.4 kg.
  • Dimensions: 9 x 9.5 x 3 inches   Metric: 240 x 230 x 80 mm.
  • Operating Temperature: 0 ~ 40C.
  • Operating Humidity: 10 ~ 90%.
  • Certification: RoHS.

 

Software Interface for adjusting Attenuator

 

LANforge Software GUI for Attenuator

 

Models and Price

 

CT 703 - 3 Channel $4,995.00

CT 704 - 4 Channel $6,650.00

 

The LANforge RF Attenuator can be purchased separately or bundled with LANforge WiFire an 802.11 a,b,g,n and ac Network Traffic generator.